Halloween 2011 - Royal Wedding - skirt

You've now seen how I made the petticoat and satin layer of the bodice for my Kate Middleton Halloween costume.


Now, lets take a look at the skirt.




First off, I bought 8 yards of extra wide ivory satin, a whopping 118" wide (it was on a big sale). The fabric is SUPER SHINY, which I'm not in love with. So, I used the "wrong side" of the fabric as my "right side", problem solved.


Since my fabric was so wide, I just had a front and a back panel to my skirt. I made measurements a few inches above the waist to the floor (accounting for the petticoat filling out the dress) and left an extra 10-12" for a wide hem.

With the measured length at hand, I cut 2 rectangles. Then, I cut those so the waist wasn't as wide, but still had plenty of extra fabric for pleats (as shown below).

I measured what the new width of the fabric at the waist was, and my actual waist measurement plus a couple of inches for seam allowance.

Next, I decided how many pleats to make and figured out how far apart (and how deep) they needed to be to end up making the waistline fit my actual measurement plus the seam allowance.

*If you want to add pockets, do so before sewing the sides of the skirt together* (I forgot to, and will probably go back and add them in)

Using a fabric pencil, I marked my fabric where all the box pleats should go. Then I sewed the sides of the skirt together, and finally sewed in the pleats.

For ideas on how to accessorize the Royal wedding day look, click here.